How to - paint touch ups

Time for paint

 

     The holidays are right around the corner, family is coming over and you would like to make a good impression. There are a few areas on your home interior walls that need touching up but you cannot find the matching paint, what do you do? Don’t panic! The following techniques will help achieve professional results.

      Take a deep breath and relax, check to see if there is any of the original paint in your supply room. If you can not find the original paint try the next step. Next  take a small sample of the paint color from the wall to the paint center and have it matched. Take a razor knife and score the sheet rock making a square the size of 2 x 2 inch. After cutting into the wall peal the first layer away from the wall. I recommend picking an inconspicuous area, behind a door is a great place to start. If you have found the paint, mix it well and try a test spot on the wall to see if it blends in. If it bends in your ready to proceed.

Clean area

    Spackle the area where the sample was taken, when dry, sand and wipe clean. Now take your newly matched paint and apply it to the areas as needed for touch ups. I found a 4 inch mini roller with a standard ½ in. nap is great for this application. The mini rollers have become very popular and can be found in most paint supply centers. Also, pick up a roller tray and a small tarp to catch any drips. Pour a little amount of paint into the roller tray and then apply paint to the roller. Try not to add too much paint to the roller.

Spot prime

     If you have any spots that have crayons or magic marker I recommend using Cover Stain Primer in a spray can. Read the instructions first and then apply a small amount to the area. When your primer dries you are ready to paint. Clean the other areas as needed.

     I found the roller technique better than using a brush. The brush tends to make a band aid appearance which is very obvious; your walls will appear to have a bad rash. Using the roller tends to blend the paint in much better. Before starting test a spot of paint and use a blow dryer to see how it blends in. If the spot of paint disappears after it dries then you’re good to go.

Apply paint

     Roll over the area that needs the fresh paint and run the path of the roller a least 12 inches on all sides lightly feathering the outer areas. (In this demonstration I used a light color so you can see what I’m explaining better ) Move your roller vertically up and down the wall. This works great for all paints but sheen paints need a little more finesse.

   If you’re touching up an area which is perpendicular to a window using eggshell, satin, semi-gloss finish it will be very noticeable. By using this technique you will have a better chance of the paint blending in. Another tip: There are shadow areas in all rooms which are next to door frames, windows, hanging pictures and furniture; these are great areas to bring your paint towards to hide the new touch up.

Feather all edges

    When the touch up is very close to an adjoining wall move you’re roller towards the wall corner. We are trying to fool the eye and make the touch ups less obvious. It is very important that the paint match is as close as the original paint. The sheen and color needs to be the same for this to be successful.

Nice and clean

   When I find spots at eye level I roll the paint as high as my arm will go and also as low. By doing this the touch up will be hard to find.  Two coats may be required over a primer. Purchase good grade paint and the results will be very nice.

    Note: If you see spots coming threw your finish work reapply the spot primer and when dry touch up the area again. Enjoy your Holiday's!