Tips for Painting Cabinets

       Lets face it we all make a mistake at one time or another but it would be great if we caught them as we were doing it.
Here are a few examples of over-sites which could be avoided.

      In this photo too much paint was applied either by roller or brush. Applying to much pressure to the roller would also cause this. To correct this if its still wet is to blend in the paint with a brush or roller. If it dried then carefully sanding with 220 grit should work. 150 grit if you need to be more aggressive. In some cases the sanding may lift the area and spackle may be used to smooth out the damage.

     Again, too much paint on the brush. Catch this when wet and it should not be a problem. Use a drier brush and lift the excess out then blend.

    When painting wood apply the paint either by brush or roller in the direction of the wood grain.
Don't be tempted to cover the area in one coat.
On cabinets thin coats will produce a beautiful finish.

    These ropes will appear when the pressure on the roller is uneven. Roll over if wet and blend in. If dry, sand lightly and skim coat with spackle to cover.

Note: Latex paint does not sand well, so avoid these paint ropes. Oil base sands well but try to avoid the extra work.

Important: When sanding lead dust may enter the air which causes many health problems. Check first for lead before starting your project. Read all product labels.
If you would like to see more on painting kitchen cabinets visit my link -
http://arrayofcolorinc.blogspot.com/2013/02/paint-kitchen-cabinets_17.html