Crosshatch Faux Technique

A crosshatch faux technique was used to create this subtle aged look. This technique can be used on the interior and exterior. To accomplish this look, paint is applied wet on wet. I applied a deep warm green and a mid warm green on a lighter cooler green base. The base and top coats were a eggshell finish . No glaze was added to the paint. A 4in. roller was used to distribute the darker green first, then a 3 in. brush was used to apply  the mid tone green using the crosshatch technique. I applied the the mid tone green in a random pattern with the same brush. The cross hatch was softened and the edges of the faux were kept in a irregular pattern. The end result will have a soft mottled appearance.

Note - With the Crosshatch technique you are basically painting X's on the wall and blending the two colors together.
 I moved right along, cutting in top and bottom,
rolling in the opened areas. Try not to let the outer edges of the paint dry. Work a couple of feet at a time and dont add too much paint into your corner. This would create a pie crust look. To avoid this, I make a point of adding paint or glaze several inches from any corner and slowly bringing the paint or glaze to the corner.

 

 The greatest thing about this technique is, it is easily repaired. Go back into the area and follow the above, blend in the area and your finished. If this is your first attempt, choose colors which are various tones of the same color. This will keep you from adding other colors which may make an  unwanted color. For the more experienced colorist, use your imagination.  Enjoy!