The positive application of a glaze is achieved by applying glaze directly to a surface using a sponge, rag, brush or other tool. Each item used to apply glaze makes its own mark.
A negative application is removing glaze from a surface. In this case we used a damp cotton rag to move the glaze on the wall from one area to another. This technique is called "walking the glaze" as the rag is being moved around it is lifting off glaze leaving a negative mark and then reapplying the glaze in another area.
The glaze is first applied by a brush onto the wall leaving a small amount which will be manipulated with a damp rag. The rag will be placed in your hand by dropping the cloth into your palm producing a pattern in the cloth. This pattern will produce the marks which will be left on the wall.
The cotton rag must be turned in many different directions to create a random pattern.Working the glaze in small sections at a time resembling puzzle pieces will produce a smooth flow threw out the area. Blend each section into the previous area.
Work the glaze into the corners by rapping the rag around your pointer finger and walking the glaze towards the edges. This works well by keeping the glaze from being over applied into the corners.
Note: I recommend a practice board before tackling your walls so you can work out any issues which may arise. Use a glaze mixture of 1 part paint to 3 parts glaze.
When your cotton rag is saturated with glaze rinse lightly in water and ring out till damp.
Wear rubber cloves
what exact shades of green were used here?
ReplyDelete